Mvci Driver For Toyotacable 201
CLICK HERE - https://blltly.com/2tygEG
How to Install Mvci Driver For Toyotacable 201 on Windows 10
If you want to use Toyota Techstream software with your Mini VCI J2534 cable, you need to install the Mvci Driver For Toyotacable 201 on your Windows 10 computer. This driver will enable the communication between the cable and the Techstream software, and allow you to diagnose and program your Toyota vehicles. Here are the steps to install the driver:
Download the Mvci Driver For Toyotacable 201 from this link: https://www.obdii365.com/wholesale/mvci-driver-for-toyota-tis.html
Extract the zip file and open the folder "Driver MVCI". You will see two subfolders: "ftdibus" and "ftdiport". These are the drivers for the USB interface of the cable.
Right-click on the file "ftdibus.inf" in the "ftdibus" folder and select "Install". Accept any warnings that appear.
Right-click on the file "ftdiport.inf" in the "ftdiport" folder and select "Install". Accept any warnings that appear.
Plug in your Mini VCI cable and wait for Windows to recognize it and load the drivers. You can check the device manager to see if the cable is detected as "USB Serial Port (COMx)" under "Ports (COM & LPT)".
Open the folder "MVCI Driver for TOYOTA TIS" and run the file "MVCI Driver for TOYOTA TIS.msi". This will install the driver for the Toyota protocol of the cable.
Select your language and click "Next".
Enter your user name and company name, and click "Next".
Select your destination folder and click "Next".
Select whether you want to create a desktop icon and click "Next".
Click "Install" and wait for the installation to complete.
Click "Finish" to exit.
Open the folder "MVCI Firmware Update Tool" and run the file "FirmwareUpdateTool.exe". This will update the firmware of the cable to version 1.4.8, which is compatible with Techstream software.
Select your device type as "XHorse - MVCI" and click "Device Info". You should see your device information and firmware version.
If your firmware version is not 1.4.8, click "Update Firmware" and wait for the process to finish.
Click "Exit" to close the tool.
Congratulations! You have successfully installed the Mvci Driver For Toyotacable 201 on your Windows 10 computer. You can now run Toyota Techstream software and connect it with your Mini VCI cable. Enjoy!
How to Use Toyota Techstream Software with Mini VCI Cable
After installing the Mvci Driver For Toyotacable 201, you can use Toyota Techstream software to diagnose and program your Toyota vehicles. Here are the steps to use the software:
Download the Toyota Techstream software from this link: https://www.obdii365.com/wholesale/toyota-tis-techstream.html
Extract the zip file and open the folder "Techstream_GTS". You will see two subfolders: "32bit" and "64bit". Choose the one that matches your Windows system.
Run the file "Techstream_GTS-16.00.017-NDSI.exe" and follow the installation wizard.
Enter your activation key when prompted. You can find the key in the file "Readme.txt" in the same folder.
Click "Finish" to complete the installation.
Create a shortcut for the file "Techstream.exe" on your desktop. Right-click on the shortcut and select "Properties".
In the "Target" field, add "/395070/VM:1" at the end of the existing path. For example, if your path is "C:\Program Files\Toyota Diagnostics\Techstream\bin\Techstream.exe", change it to "C:\Program Files\Toyota Diagnostics\Techstream\bin\Techstream.exe /395070/VM:1". This will bypass the TIS access error.
Click "Apply" and "OK" to save the changes.
Run the Techstream software from the shortcut on your desktop. If you see a Java Runtime message, click "No" to continue.
Select your language and click "OK".
Select "Setup" tab and then "VIM Select". Choose "XHorse - MVCI" as your interface and click "OK".
Select "Connect to Vehicle" tab and enter your vehicle information. Click "Next".
The software will initialize the USB communication and connect to your vehicle. You can now access various functions such as health check, customization, coding